WSE-315 AC/DC Series Argon Tungston Pulsed Arc Welding Machine

　　WSME－315AC／DC serie argon tungston pulsed arc welding machine is a kind of new multi-purpose welding machine using the argon as the protective medium. It can weld various mild steel, stainless steel, cooper, alloy and titanium for its F1.0~F4.0 tungsten electrode. It specially adapts to aluminium, magnesium and its alloy.

1. The welding machine is stable and reliable in function, convenient in regulation. Also: AC and DC, constant current and pulse are both available in this machine. It can weld various materials; and can also used in AC or DC manual arc welding.

2. In AC welding, square wave current shall be adopted and it features of fast speed of current crossover, stable arc, no arc deviation caused by magnetic force , strong ability of arc penetration and strong ability of self-arc stabilizing. So it can reduce the harmful effects to the welding workers resulting from ordinary argon arc welding machine.

3. In the weld of aluminium, magnesium and alloy, there is no DC heft for the flexible regulation of semi-sphere current. No need of capacitance to separate DC reduces the bulk and weight of the welding. If necessary, it can be partially regulated purposely to improve welding penetration and reduce tungsten electrode loss.

4. Pulse frequency can be regulated equalbly; peak current and basic current can be regulated repectively; easy and convenient in regulation.

5. It has the function of lifting and dropping slowly and the slope can be regulated respectively to ensure the quality of arcing and arc stopping .

6. It has the feature of vertical dropping to maintain the stable current and welding quality.

Technical Datas

WSM DC Argon Tungston Pulsed Arc Welding Machine

Argon tungston pulsed arc welding machine is a kind of manual welding machine with the tungston as the protective medium and uses the Φ1.0-Φ4 tungsten electrode as the electrode. It can be used in the weld of sheet metal and cut deal of mild steel, stainless steel, titanium alloy, copper and copper.

This machine features of stable, reliable, easy to regulating and:

1. Function of automatic protection to prevent the accident.

2. Both constant current and pulse are available.

3. The cycle of pulse is stepless in pulse welding and the peak current and basic current can be regulated repectively which features of wide regulating range and reliable.

4. Continuous welding and tack-weld are both available in this machine. In the large current welding, continous welding mode can bring you the more satisfactory effect through the regulation of lifting time and dropping time of the welding current. While, the welding current is the setting current without lifting and dropping time in the tack-weld mode through which the efficiency can be largely improved.

5. It has automatic electricity saving function, namely, when there is no the second time weld 2-3 minutes after previous weld, the machine will automatically switch off the power of main transformer until the next weld it will switch on automatically.

Technical datas

Using conditions:
The following conditions are suited:
Range of air temperature:
weld:+5℃～+40℃
Transportation and storage: +5℃～+55℃

2. The dust, acid, caustic gas or material is no more than the normal value, except for the ones produced during welding.

3.The altitute is no more than 1000 meters.

4. The capacity of power source shall be more than 20KVA and input cable shall be 3×6mm2.

5. Weld-used argon is required and it shall be over 99.9％ in fineness.

6. Tap water or cooling water devices shall be adopts in water cooling welding torch.

7. The welding machine shall be placed in the circumstance with little damp, no large shake and keep over 50cm away from the wall, combustible and explosive materials.